Skip to content

Lutz B70V-SR Progressive Cavity Drum Pump 12.1 and 50.1

The B70V-SR is suitable for aqueous to highly-viscous substances with or without fibrous or solid matters. For applications in the food, pharmaceutical and cosmetics industry, no special shaft joint is needed. The pump is either operated with Lutz universal motors 110-120V AC or with compressed air motors.

Liquid examples:

Chemical industry:
acids, lyes, sludge, viscous pastes, dispersions, adhesives, etc.
Cosmetics industry:
creams, soaps, toothpaste, shampoos and raw materials for soaps.
Confectionery industry:
honey, syrups and preserves.
Paint and lacquer factories:
paints, lacquers and pastes
Food industry:
milk, whey, cheese, spread and ketchup.
Mineral oil industry:
high-viscosity oils and fluid greases

Features:
  • For shear sensitive and sticky liquids from 1- 20.000 cps (1- 20.000 mPas)
  • Positive displacement pump with planetary gear according to eccentric screw principle
  • Suitable for all Lutz universal motors and compressed air motors
  • Easy detachable pump tube
  • Explosion-proof version available
Benefit
  • Smooth flow
  • Constant volumetric flow
  • Quiet operation
  • Easy handling
  • Easy to clean
  • Minimum wear

Sealing system:
Mechanical seal (MS) or packing gland (St)

Drive shaft :
Torsion shaft (TS) or universal joint shaft (UJ)

Immersion length:
43″ (1100 mm)

Lutz, Progressive Cavity Pump, B70V-SR 50.1B70V-SR (Ex) pump tubes are “Zone 0” approved in combination with the original Lutz motors ME I 6 Silver Star (Ex) / MD-1 (Ex) / MD-2 (Ex) in accordance with standards for use in hazardous locations.

Motors

Motor B 36 / MI 4
Motor B 36-SC / MI 4 E

Lutz, Progressive Cavity Pump, B70V-SR 50.1Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Optionally with infinitely variable speed controller for a controlled flow rate
  • Internally ventilated
  • 110-120 V / 60Hz,
    640 W / 0.85 HP
  • Open drip proof in accordance with protection class IP 24, double insulated, 16′ (5 m) cord and plug

Lutz, Progressive Cavity Pump, B70V-SR 50.1

Motor B 28

Lutz, Progressive Cavity Pump, B70V-SR 50.1Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Internally ventilated
  • 110-120 V / 60Hz,
    800 W / 1.07 HP
  • Open drip proof, double insulated, 16′ (5 m) cord and plug
Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7

Lutz, Progressive Cavity Pump, B70V-SR 50.1Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.

  • Robust and powerful
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 110-120 V / 60Hz,
    510 W / 0.68 HP (B 55-T-5)
    700 W / 0.93 HP (B 55-T-7)
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16′ (5 m) cord and plug

Lutz, Progressive Cavity Pump, B70V-SR 50.1

Motor ME I 6 (Ex) Silver Star

Lutz, Progressive Cavity Pump, B70V-SR 50.1A light, easily handled, explosion proof motor, suitable almost all types of thin-bodied, slightly viscous, flammable liquids.

  • Lutz, Progressive Cavity Pump, B70V-SR 50.1Extremely rigid aluminium casing, robust high-power motor
  • Electronic speed control to constantly ensure the right flow rate
  • Separate ON/OFF buttons with low voltage release for safety and ease of handling
  • 120 V / 60Hz 640 W / 0.85 HP
  • Splash-proof in accordance with protection class IP 54, 16′ (5 m) cord, optionally with remote operating kit.

Lutz, Progressive Cavity Pump, B70V-SR 50.1