Stenner M128 Peristaltic Pump
- 1:128 Medicator - M128 Series
Stenner M128 Peristaltic Pump - 1:128 Medicator - M128 Series
The M128 peristaltic pump delivers reliable injection at a 1:128 proportion for livestock water treatment.
The M128 series was specifically designed to inject solutions at a 1:128 ratio to treat livestock water with sanitizers, disinfectants, nutrients and medications. Also referred to as a medicator, the pump will automatically meter solution proportional to the water flow at a rate of one ounce of solution to 128 ounces of process water. For convenient and quick installations or turnkey operations, the M128 System is equipped with the pump and corresponding dry contact 3/4" or 1" Water Meter mounted on a heavy duty panel.
The M128 series is available as two models, the M05 or M07. The primary differences are the output capability and pressure rating. Most livestock operations have a pressure reducer in place to drop pressures to a manageable level at the drinker lines. Injecting after the pressure reducer is an option, if higher outputs are needed.
- M07: 3.5 oz/min up to 100 psi (105 ml/min up to 6.9 bar)
- M05: 8.4 oz/min up to 25 psi (249.7 ml/min up to 1.7 bar)
Advantages of Stenner’s Peristaltic Pumps
- Solution is not in contact with moving parts and runs through a food grade pump tube.
- Pump head requires no valves, allows for easy maintenance.
- Self-priming against maximum working pressure, foot valve not required.
- Pump does not lose prime or vapor lock.
- Pumps off-gassing solutions and can run dry.
- Output volume is not affected by back pressure.
0-25 psi (0-1.7 bar)
Maximum system water flow for 1:128 dosing is 8.4 gallons/minute or 31.8 liters/minute.
26-100 psi (1.8-6.9 bar)
Maximum system water flow for 1:128 dosing is 3.5 gallons/minute or 13.2 liters/minute.
Alternative Sizing For M07 Model Using 1 pulse/gallon Meter
|Dosage oz/gal||Dosage Ratio||Max. System
NOTE: 1 oz = 29.57 ml ; 1 gallon = 3.78 liters. Contact factory for assistance with sizing.
NOTE: Injection check valve included with pumps rated 26-100 psi (1.8-6.9 bar)
NOTICE: The information within this chart is solely intended for use as a guide. The output
data is an approximation based on pumping water under a controlled testing environment. Many
variables can affect the output of the pump. Stenner Pump Company recommends that all metering
pumps undergo field calibration by means of analytical testing to confirm their outputs.
|Maximum Operating Temperature||104°F (40°C)|
|Maximum Suction Lift||25 ft (7.6 m) vertical lift, based on water|
|Motor Type||24VDC, 2.0 A, Brushed DC, 1/30 HP|
|Motor Voltage (Amp Draw)||120V 60Hz 1PH (0.5)
220V 60Hz 1PH (0.33)
|Power Cord Type||SJTOW|
|Power Cord Plug End||120V 60Hz NEMA 5/15
220V 60Hz NEMA 6/15
Materials of Construction
|Pump Tube & Check Valve Duckbill||Santoprene®*, FDA approved|
|Pump Head Rollers||HDPE|
|Roller Bushings||Oil impregnated sintered bronze|
|Polyethylene, FDA approved|
|Tube Fittings, Check Valve Fittings||Gray fittings: Type 1 Rigid PVC, NSF listed
Black fittings: PP, NSF listed
|Connecting Nuts||PP or Type 1 Rigid PVC|
|Suction Line Strainer||PP or Type 1 Rigid PVC body with Type 1
Rigid PVC cap, NSF listed; ceramic weight
|All Fasteners||Stainless steel|
|Pump Head Latches||Polypropylene|
Listings vary by model.
* Santoprene® is a registered trademark of Exxon Mobil Corporation.
** Versilon™ is a registered trademark of Saint-Gobain Performance Plastics.
† Pellathane® is a registered trademark of The Dow Company.
Shipping Weight: 10 lbs (4.5 kg)
Box Dimensions: 14 x 9 x 9 in. (35 x 23 x 23 cm)