Skip to content

Peristaltic Pumps

Tanks

Pump Accessories

S Series Variable Speed

S Series Variable Speed Peristaltic Pump From Stenner

S Series Variable Speed Peristaltic Pump
The S Series Variable Speed Pump offers several modes of operation and performance indicators.
The S Series Variable Speed Pump is an advanced peristaltic metering pump designed to interface with process control systems. Prevent unauthorized access to programmed settings with the password protection. Program the transfer function to activate a relay to start a second S Series as a back up to the primary pump.

The OLED operating display is easy to navigate with intuitive programming. Select from the various modes of operation:

Request More Information
Pump Signal Inputs– Analog: 4-20mA, 0-10VDC – scalable, invertible
– Digital: Pulse, Hall Effect, PPM Feed Constant Flow, PPM Feed Variable Flow
– Manual: Manual, 7 Day/24 Hour Timer, Cycle TimerPump Signal Outputs– Analog: 4-20mA
– Digital: Three RelaysThe pump can be programmed to respond based on a selected pump condition such as tube leak, tube change, standby, repeat pulse, run, mode change, low or high signal, low or high flow, drive fault, signal overrun, transfer and off.

The totally enclosed pump is outdoor rated and built to NEMA 4X for demanding applications. Additional agency listings include NSF 61 & 372, cULus indoor/outdoor; CE IP65 is also available with selected voltages. The brushless DC motor is equipped with ball bearing support and the switch power mode offers energy efficiency. The splined shaft designed pump head and roller assembly allow smooth installation and replacement. Tube replacement is fast and easy with the patent pending QuickPro® pump head.

Applications include:

  • Treatment of return wastewater before it can be processed for further usage.
  • Injection of liquid biocides in cooling towers for prevention of Legionnaires disease.
  • Corrosion, scale, and algae control on plumbing fixtures and water supply equipment.
  • Metering additives specific to a manufacturing process.
  • pH control for process water or metal plating discharge water.

Stenner Pumps – Built with A Strong Work Ethic

  • Self-priming against maximum working pressure
  • Can inject off-gassing solutions
  • No vapor lock or loss of prime
  • Easy tube replacement without tools
  • Uniquely manufactured solid one piece tube construction
  • Tube lubrication not required
  • Three point roller design assist with anti-siphoning
  • Output reproducibility
  • Output volume not affected by back pressure
  • Foot, prime or de-gassing valve not required
Output
Model Item No.
Prefix		 Pump
Tube #		 Turn Down
Ratio		 Gallons
per Day		 Gallons
per Hour		 Ounces
per Hour		 Ounces
per Minute		 Liters
per Day		 Liters
per Hour		 Milliliters
per Hour		 Milliliters
per Minute
25psi (1.7 bar) maximum                  Approximate Output @ 50/60Hz
S3003
S3003
 #3 100:1 0.40 to 40 0.017 to 1.67 2.13 to 213 0.036 to 3.56 1.51 to 151 0.063 to 6.31 63.09 to 6309 1.05 to 105
S3004
S3004
 #4 100:1 0.60 to 60 0.025 to 2.50 3.20 to 320 0.053 to 5.33 2.27 to 227 0.095 to 9.46 94.64 to 9464 1.58 to 158
S3005
S3005
 #5 100:1 0.85 to 85 0.035 to 3.54 4.53 to 453 0.076 to 7.56 3.22 to 322 0.134 to 13.41 134.07 to 13407 2.23 to 223
100psi (6.9 bar) maximum                 Approximate Output @ 50/60Hz
S3001
S3001
 #1 100:1 0.05 to 5 0.002 to 0.21 0.27 to 27 0.004 to 0.44 0.19 to 19 0.008 to 0.79 7.89 to 789 0.13 to 13
S3002
S3002
 #2 100:1 0.17 to 17 0.007 to 0.71 0.91 to 91 0.015 to 1.51 0.64 to 64 0.027 to 2.68 26.81 to 2681 0.45 to 45
S3007
S3007
 #7 100:1 0.40 to 40 0.017 to 1.67 2.13 to 213 0.036 to 3.56 1.51 to 151 0.063 to 6.31 63.09 to 6309 1.05 to 105

NOTE: Injection check valve included with pumps rated 100 psi (6.9 bar) maximum.

NOTICE: The information within this chart is solely intended for use as a guide.
The output data is an approximation based on pumping water under a controlled testing environment.
Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering
pumps undergo field calibration by means of analytical testing to confirm their outputs.

Specifications
Maximum Operating Temperature 104ºF (40ºC)
Maximum Altitude 2000 meters
Maximum Suction Lift 25 ft (7.6 m) vertical lift, based on water
Motor Type Brushless
RPM Variable
RPM Maximum 45
Duty Cycle Continuous
Reproducibility + / – 2%
Viscosity Maximum 1500 centipoise
Pulse Duration Required 10 milliseconds (required for pump to read signal)
Motor Voltage (Amp Draw) 120V 60Hz 1PH (0.6)
230V 50Hz I PH (0.3)
Power Cord Type 120V 60Hz: SJTOW
230V 50Hz: HO5RNF
Power Cord Plug End 120V 60Hz 15P
230V 50Hz CEE7/7
230V 50Hz SEV1011

Materials of Construction
All Housings Polycarbonate
Pump Tube & Check Valve Duckbill Santoprene ®*, FDA approved, Versilon ®**
Duckbill with Versilon ®**, Pellethane ®†
Pump Head Rollers Polyethylene
Roller Bushings Oil impregnated bronze
Suction/Discharge Tubing
and Ferrules		 Polyethylene, FDA approved
Tube & Injection Fittings PVC or Polypropylene, NSF listed
Connecting Nuts PVC, NSF listed
Suction Line Strainer and Cap PVC or Polypropylene, NSF listed, with Ceramic Weight
All Fasteners Stainless steel
Pump Head Latches Polypropylene
Leak Detect Clips, Springs, Pins Hastelloy ®††

Listings vary by model.

* Santoprene® is a registered trademark of Exxon Mobil Corporation.

** Versilon™ is a registered trademark of Saint-Gobain Performance Plastics.

† Pellathane® is a registered trademark of The Dow Company.

Pump Dimensions

Shipping Weight: 9 lbs (4.1 kg)

Box Dimensions: 14 x 9 x 9 in. (35 x 23 x 23 cm)