Skip to content

Peristaltic Pumps

Tanks

Pump Accessories

S10P Series

FEATURES

  • Activated by a softener valve, water meter, flow switch or other flow activated equipment
  • Accepts dry contact or 12-24 VAC/VDC signal
  • Steady solution distribution with 10 PPG mode and 10 PPG dry contact water meter
  • Leak detection with dedicated output relay
  • Built-in dry contact signal repeater
  • Accepts input from a fluid level device
  • Totally enclosed housing
  • 2 year warranty
  • Self-priming, does not lose prime or vapor lock
  • Pumps off-gassing solutions and can run dry
  • 3-point roller design assists with anti-siphon
  • Tube replacement without tools
  • Output reproducibility
Request More Information
Specifications
Flow Rate Output Control Six button control panel with LCD display
Reproducibility ±2%
Maximum Working Pressure 100 psi (6.9 bar)
Maximum Operating Temperature 104°F (40°C)
Maximum Suction Lift 25 ft (7.6 m) vertical lift, based on water
Motor Type Brushless DC motor
Shaft rpm (average maximum) 45
Duty Cycle Continuous
Maximum Viscosity 1500 Centipoise
Motor Voltage (Amp Draw) 120V 60Hz 1PH (0.6)
Power Cord Type 120V 60Hz SJTOWA
Power Cord Plug End 120V 60Hz 5-15P
Power Cord Length 6 ft (1.8 m)
Classification Indoor/Outdoor

 

MATERIALS OF CONSTRUCTION
All Housings Polycarbonate
Pump Tube & Check Valve Duckbil Santoprene®(FDA approved)
Pump Head Rollers Polyethylene
Roller Bushings Oil impregnated bronze
Suction/Discharge Tubing, Ferrules Polyethylene (FDA approved)
Tube and Injection Fittings PVC or Polypropylene (both NSF listed)
Connecting Nuts PVC or Polypropylene (both NSF listed)
Suction Line Strainer and Cap PVC or Polypropylene (both NSF listed); ceramic weight
All Fasteners Stainless steel
Pump Head Latches Polypropylene
Leak Detect Components Hastelloy®

NOTE: Refer to the chemical guide for material compatibility. Santoprene® is a registered trademark of Exxon Mobil Corporation. Hastelloy® is a registered trademark of Haynes International, Inc.

 

ACCESSORIES
  • 3 Connecting nuts 1/4″
  • 1 Duckbill check valve
  • 3 Ferrules 1/4″ or 6 mm Europe
  • 1 Weighted suction line strainer 1/4″ or 6 mm Europe
  • 1 20′ Roll suction/discharge tubing 1/4″ white, UV black or 6 mm white Europe
  • 1 Additional pump tube
  • 2 Additional Latches
  • 1 Mounting bracket
  • 1 Manual
FLOW RATE OUTPUTS

100 psi (6.9 bar) maximum

Item Number Prefix Pump Tube Turndown Ratio Turndown @ 10 PPG
–
S3P01 1 10:1 4:1
S3P02 2 10:1 4:1
S3P06 6 10:1 4:1
Gallons per Day Gallons per Hour Ounces per Hour Ounces per Minute
Approximate Maximum Outputs @ 50/60Hz
5.0 0.21 27.0 0.44
17.0 0.71 91.0 1.51
30.0 1.25 160.0 2.67
Liters per Day Liters per Hour Milliliters per Hour Milliliters per Minute
Approximate Maximum Outputs @ 50/60Hz
19.0 0.79 789.0 13.0
64.0 2.68 2681.0 45.0
114.0 4.73 4732.0 79.0

 

NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs. The information contained in this flyer is not intended for specific application purposes. Stenner Pump Company reserves the right to make changes to prices, products, and specifications at any time without prior notice.

Dimensions

Shipping Weight 9 lbs (3.7 kg)