8800 Series Level Gauge
The 8800 Series Level Gauge features 90° connections for ease of installation. The Gauge is fitted with inline 1/4" FNPT vent and drain connections. Because the vent and drain connections are inline, glass cleaning is easy.
The centerline dimensional tolerance is 1/16". This assures that the gauge will fit the mounting connection of the tank.
The sight tube of the 8800 Series Level Gauge is totally protected. Three sides of the gauge are enclosed with a metal frame, while the face of the gauge is protected with a polycarbonate shield. This shield can be custom calibrated to read tank volume or any other calibration. Refer to the Product Specifications tab to see the assortment of standard shield options.
Applications:
For low to medium pressure applications up to 500 psig, including oil or fuel storage tanks, cooling tower water tanks, and boiler feedwater tanks.
Specifications:
PROCESS CONNECTIONS:
88M50 = 1/2″ MNPT
88M75 = 3/4″ MNPT
88F50 = 1/2″ FNPT
88F75 = 3/4″ FNPT
88FL50 = 1/2″ Flange
88FL75 = 3/4″ Flange
88FL1.0 = 1″ Flange
88FL1.5 = 1 1/2″ Flange
88FL2.0 = 2″ Flange
HOUSING MATERIAL:
C = Zinc Plated Carbon Steel
A = All Wetted Parts 316 Stainless Steel with 304 Stainless Steel Frame
PC = All Wetted Parts PVC with Carbon Steel Frame
PS = All Wetted Parts PVC with Stainless Steel Frame
SIGHT TUBE MATERIAL:
5/8″ O.D. Standard Glass
*Other Sight Tube Materials Available. Consult Factory For Options.
SEALS:
V = Fluorocarbon
A = Aflas
B = Buna-N
TES = PTFE Encapsulated Silicone
E = Ethylene Propylene
*Other Seal Materials Available. Consult Factory For Options.
SHIELD OPTIONS:
RH
The Rate/Height shield is used for checking the pump rate of a chemical pump. It is calibrated in QTS/24 Hrs., ML/Min and has a height scale labeled in 1/4″ increments.
H
The Height shield is marked in 1/4″ Increments and labeled every inch.
MRH
The Metric Rate/Height shield is calibrated in ML/Min and Liters/24 hrs. The height scale is labeled in 1 CM divisions.
MH
The Metric Height shield is marked in 1 CM increments and labeled every 5 CM.
M
The Expanded Metal shield is made from flattened expanded metal and is available in electroplated carbon steel or 304 stainless steel.
L
The Clear Polycarbonate shield has no markings, and provides 100% visibility as well as environmental protection.
CUSTOM SHIELDS: KENCO can provide custom scales to meet your needs. The Polycarbonate custom scales are usually engraved and paint-filled. If you are needing scales indicating tank volume or other scale calibrations, please consult the factory.
** IMPORTANT: Pressure and temperature are dependent on the length of glass and the elastomer chosen. Please consult the factory for minimum and maximum pressure and temperature constraints.