Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)

Hardware & Accessories from Turtle Tough

USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - sales@metexcorporation.com


Hardware & Accessories

Backend Water Protection

The water protection option is suitable for most applications and is the most cost effective water resistant option providing complete cable isolation with Vinyl or Norprene (high temperature) tubing.

  • Complete isolation of back end threaded fitting from liquid process and good protection of cable from corrosion and chemical attack
  • The most cost effective waterproofing option
  • Recommended for extending sensor lifetime where attack of liquid from back end causes death to sensor (typically by corrosion along cable) prior to chemical or physical attack through front of the sensors
  • CPVC optional for strong oxidative or reducing solutions (Cl2, ClO2, H2O2 etc)

Backend Standard Waterproofing

The standard waterproofing options is suitable for most aggressive agitated slurries and corrosive solutions. This is also an ideal mounting point onto long immersion rods and stand pipes as it provides a significant level of strength and shock absorption for the sensor..

  • Complete isolation of back end threaded fitting from liquid process and good protection of cable from corrosion and chemical attack
  • Hex Head for wrench flats enable easy installations into fixtures
  • Recommended for extreme slurry and viscous solutions which can abraid cable assemblies
  • Recommended for extending sensor life where attack of liquid from back end causes death to sensor prior to chemical or physical attack through front of sensor
  • Not Recommended for extreme installations which do not utilise any kind of immersion rod or conduit

Backend Extreme Waterproofing

The Turtle Tough extreme waterproofing solution is suitable for the most aggressive agitated slurries and corrosive solutions. This waterproofing is also recommended for installations where the sensor is installed directly into the process without an immersion rod or conduit. This is ideal for our drop-tube applications as the cable is completely isolated with the option of Vinyl or Norprene tubing.

  • Complete isolation of back end threaded fitting from liquid process and good protection of cable from corrosion and chemical attack
  • Hex Head for wrench flats enable easy installations into fixtures
  • Recommended for extremely corrosive installations
  • Recommended for extreme slurry and viscous solutions which can abraid cable assemblies
  • Recommended for installations requiring direct insertion – drop tube applications
  • Recommended for extending sensor life where attack of liquid from back end causes death to sensor prior to chemical or physical attack through front of sensor
  • CPVC optional for strong oxidative or reducing solutions (Cl2, ClO2, H2O2 etc)

Immersion Rod – Stainless Steel

  • Allows sensor installation from the top of a tank
  • 316 Stainless steel
  • 3 metres long
  • Supplied as two pieces
  • Comes with
        - Mounting brackets
        - Female fittings for sensor attachment
        - Junction box mounting plate
  • Shipping Dimensions – 162x14x14(cm)
  • Shipping Weight – 9Kg Gross

Twist Lock Receptacle

  • Suit the Turtle Tough Twist Lock Sensor body
  • Allows for easy line installation and removal
  • Available in Kynar or PEEK plastic options
        - Kynar – 50 psig
        - PEEK – 100 psig
  • 1” MNPT male thread for line installation

pH/ORP Sensor Care Kit

Recommended pH/ORP Sensor Care Kit

Includes:

  • Cap Storage & Conditioning Solution
  • Glass Cleaning Compound
  • 10% HCl Cleaning Solution
  • Brush for Glass Cleaning
  • 100ml beaker
  • Carry bucket

HOT TAP – Valve Retractable Assembly

  • 316 Stainless steel
  • Available as
        - Single or Double Ball Valve
        - Stainless, Duplex or SAF
        - 2”, 1 ½” or 1/ ¼”
  • Comes with ?Valve
        - Body with Pressure relief valve
        - Top threaded fitting to take Swagelok.
  • Required Components for complete assembly (sold separately)
        - Sensor Holder
        - Extension Tube

Sensor Holder – Stainless Steel

  • 316 Stainless
  • Fully machined internal threads
  • Designed to suit Turtle Tough Sanitary and Valve Retractable body design
  • 31.9mm diameter
  • 219mm long

Extension Tube – Stainless Steel

  • 316 Stainless steel
  • Designed to connect with sensor holder
  • ¾ NPT front Threaded Joint with 0-ring
  • 300 mm long (Custom sizes available)
  • 4mm diameter
  • Custom lengths available

Sensor Insertion Rod

  • 316 Stainless steel
  • Designed to connect with 3/4? MNPT thread on back of valve retractable sensor type
  • ¾ NPT front Thread
  • 900 mm long (Custom sizes available)

HOT TAP – DUAL PORT FLUSH PURGE Valve Retractable Assembly

HOT TAP – Dual Port Flush Purge Valve Retractable Assembly

  • 316 Stainless steel
  • Flush sensors with cleaning solution before removal from process
  • Available as
        - Single or Double Ball Valve
        - Stainless, Duplex or SAF
        - 2”, 1 ½” or 1/ ¼”
  • Comes with ?Valve
        - Body with Pressure relief valve
        - Top threaded fitting to take Swagelok.
  • Required Components for complete assembly (sold separately) ?Sensor Holder
        - Extension Tube

Sensor Holder – Sanitary Fitting

Sanitary Fittings for Tri-Clover Installations

  • FDA 3A Grade 316SS Sanitary Sensor Holder
  • Allows accurate sensor insertion
  • Custom lengths and sizes available on request
  • Includes
        - Sensor Holder
        - Custom Sanitary Flange Sizes: 1 1/2", 2", 2 1/2"
        - Cable Gland (IP69K optional)

Digital Sensor – Cable Extension

  • Extends the Digital Sensor Cable
  • Available in: 3, 6 and 12 metre lengths

Single Junction Box

  • Allows extended fixed cable runs
  • Available to use with either
        - Tin Leads
        - Digital Connector
  • Uses an IP68 enclosure for protection
  • Designed to install onto Immersion Rod Assembly mounting plate

Double Junction Box

  • Allows extended fixed cable runs
  • Available to use with either ?Tin Leads
        - Digital Connector
  • Uses an IP68 enclosure for protection

UPT – Ultra Low Power Timer

  • Ultra-low power consumption 0.4mA @ 24VDC
  • Ideal for remote applications running of battery power
  • Obtain up to 12 months run time of 12AH battery
  • Din Rail Mount alongside TT-MA Analysers
  • 12AH, 24V Lead Acid Battery System (optional) ?Unlimited supply capacity options

 

METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch